How to use Defu 368A key machine makes double sided flat keys?

Defu 368A is a very cheap machine, but does cut most keys well with clamp addons for tibbe etc.
DOES NOT DO “all keys lost”
Ok for doing double sided flat keys buy a universal key clamp and cut it up as in picture 1. (universal clamp won’t do these keys)
drill 2.5 mm holes for clamp screws and use 3mm tap to run threads picture 2.
cut some shims from the supplied steel shims picture 3.
Pictures 4 and 5 perfect working key
brilliant machine for the money.XTOOL
FYI, Aliexpress or ebay “universal key clamp” should get you started.

First test here all good work perfectly.Xhorse iKeycutter XC-Mini



For Defu 368A vertical key machine, you can go for:
http://www.uobdii.com/wholesale/368a-key-cutting-duplicated-machine-200w.html

Article from:Defu 368A vertical key machine makes double sided flat keys perfectly

OtoSys IM100 Program Key for Volvo 2010-2016

AURO Otosys IM100 is verified to work with VOLVO immobilizer from the year 2010 to 2016.It’s second to Lonsdor K518ise universal key programming tool that support VOLVO.

http://www.obd360.com
Step 1: learn keys
AURO Otosys im100 tested with Volvo immo…

Otosys IM100 Volvo car list:
Volvo S60, S80, V40, V60, V70, XC60, XC70
semi-smart keys 2010-2016
Keyless CAN system

Auro IM100 begins to program new semi-smartkeys to Volvo when all keys are lost


If you want to continue to performing this function, there must be one key!
The original key, if cleared successfully, needs to be learned again
Please verify the type of the key first
Ignition off
Learned keys: 2

Step 2: decrypt the immo & clear all keys
The immobilizer unit is to be decrypted, which may last a few hours.
Please make sure that the ignition is turned off
You can exit this process at any time and continue from the interruption point in the next operation

Decrypting the immobilizer unit…
The procedure will take 0-8 hours due to the difference between vehicles.
You’d better manually close the center-control LCD, lamp, etc. Toreduce the power consumption
It doesn’t matter whether the door is opened or closed
You can exit this process at any time and continue from the interruption point in the next operation

Decrytion success

Otosys im100 is reading security data
Don’t disconnect the OBD connection

Copy CEM security data successfully

All key cleared! Learned keys: 0


Step 3: learn keys
Key learning success

Ignition off  OBDSTAR
Remove the key from the key slot

Learned keys: 4

UOBDII All rights reserved How to Use OtoSys IM100 to Program Key for Volvo 2010-2016