CK360 Easy Check Remote Tester is a new Remote Key Tester for Frequency 315Mhz-868Mhz & Key Chip & Battery 3 in 1, also support Mercedes infrared key detection and Intelligent signal detection,best choice for technicians and repair shop.And here OBD2 will show you how to use it to detect VW MQB keys,include MQB-A and MQB-B.
Note:VVDI Mini Key Tool,Tango and Handy Baby 2 can not identify MQB-B key,but CK360 tester can!
CK360 Tester Identify VW MQB-A and MQB-B Key:
Power on CK360 Easy Check tester, then select key identification menu and put the key on the coil.
Press power button
Then CK360 will start key identification,please wait
Now it show the key information:
49+ type
ID:C60A1E3F
MQB-B
And press back button,then put another key on the coil
Press power button to start identification
Show the key information:
48 type
ID:0AB0E06A
MAB-A
Done!
More detail about CK360 Remote Tester,please check here:
http://www.uobdii.com/wholesale/ck360-easy-check-remote-key-tester.html
Auto OBD2 Tool provide car diagnostic tool,auto key programmer,ecu chip tuning and mileage progammer test report and share useful article for you.
Sunday, May 26, 2019
Thursday, May 23, 2019
Scania SDP3 v2.39.1 Win 7 Installation & Activation Guide
Look here: good write-up of Scania VCI3 SDP3 v2.39.1 application and driver software download, installation, activatation, cracking, vci update
THE MOST IMPORTANT:
you should have functional SDP3 v2.39.1 software for Scania VCI 3:
https://share.weiyun.com/5gC8I8y (password: 5g4dh4)
operating system:
SDP3 2.39 works well on Windows 7 32 bit
THE MOST IMPORTANT:
you should have functional SDP3 v2.39.1 software for Scania VCI 3:
https://share.weiyun.com/5gC8I8y (password: 5g4dh4)
operating system:
SDP3 2.39 works well on Windows 7 32 bit
Tuesday, May 14, 2019
How to Use SEC-E9 Machine Cut Tubular key?
In this article keycuttingmachine will show you how to use SEC-E9 machine to cut tubular key,hope it helps!
what is a tubular key?
Tubular keys are short keys with a hollow shaft most often used to open vending machines to retrieve coins and cash. A universal tubular key is one that is cut to fit a set of machines so that there is not a separate key for each machine.
what is a tubular key?
Tubular keys are short keys with a hollow shaft most often used to open vending machines to retrieve coins and cash. A universal tubular key is one that is cut to fit a set of machines so that there is not a separate key for each machine.
Subscribe to:
Posts (Atom)