Foxwell NT510 and iCarsoft Feedback on Jaguar X350

China OBD2 
 
Car model and year: 2004 XJ Super V8.
Problem: parking sensor problems
Tools to use and test reports:

1. I use a iCarsoft and it’s good reads live data so it will tell you what sensor has a fault.
2. I have the same problem with my 2004 VDP, the parking alarm goes off for 3 secs and they do not work when reversing.

I week ago, I purchased an icarsoft i930 and under the “Parking aid control module” it gave me a C-1707 – Rear Left Center Sensor Failure (which is correct)

I saw that since the parking sensors are “sonic” i.e. they give out a very quiet “clicking noise” all 3 rear sensors were clicking except the one identified with the i930.

I have to say that I had a problem with the i930 that under the “ECU” section it gave me the “Fault in communication with vehicle ECU”.

(This fault also appears on other posts re scanners) I called the distributor I purchased it from and he said the better jaguar scanner was the Foxwell 510 and I have since upgraded to that model.

I am now waiting for the Foxwell 510 to arrive and will report back.

Foxwell NT510 scanner for Jaguar
Just received the new Foxwell 510 scanner for Jaguar and I am very impressed.
It had no problem communicating with all the modules on the 2004 XJ8 VDP it also shown up c-1430 and C-1707 rear left center sensor fault which will get done this week, hopefully.

So far ready like this scanner, comes with an excellent handbook, plus a CD with the handbook on, 59 pages much more complete than the icarsoft i930.

This scanner will do much more than I will ever need it for!!!
This is the one to get!!
Go to their website to download the manual.

Who sells the Foxwell scanner? It doesn’t appear that they do direct sales.
Original Foxwell $155 doesn’t need to pay for Jaguar software, but can add up to 5 car brands, 70usd/one brand.
Attach foxwelltool.com logo, please be confirmed before order one original NT510.

Article from:http://chasencai.over-blog.com/2017/10/foxwell-nt510-and-icarsoft-feedback-on-jaguar-x350.html

How to solve Foxwell NT510 can not register?

UOBD2 customer service feedback: although most NT510 Scanner users operation no issure, he received a message saying “I am not able to register mine Foxwell NT510 OBD2 Scanner. The web site says my Serial Number does not exist. I went to the Update page, and this product does not exist. Only after going to the Product page was I able to find this scanner and I downloaded the foxwell Tools. I am not able to use this either because of “Network Error”. And… There was some mysterious USB drive included in the package that also does not work. I’m pretty sure I just installed Putin’s Democrat hacking software.”

First, please make sure the serial number and registered password are correct. Please pay special attention to letter “O” and number “0” and letter “I” and number “1” also. Even though there is a serial number on the back label, please always use the one you found by selecting Setup>About. What’s more,please pay much attention to the model number,the model number is BMW_MINI_Scanner_14020SCH,which should Consistent with serial number.

Solved:
Foxwell writes “Please click the link below to download and install the latest version Foxscanner 7.60 from our website: http://www.foxwelltech.com/product/item-169.html

Up and running.
The newest version is required then is connects right away.
Put the sd card from the scanner into the USB adapter and plug into the PC. The Foxwell software will display what updates are available then updates the sd card. Put the sd card back in the scanner.

More information about Foxwell NT510 OBD2 scanner,visit website:http://www.uobdii.com/wholesale/foxwell-nt510-multi-system-scanner.html