How to Use Digimaster 3 to Decode Mercedes Benz Audio?

When the vehicle audio was power off because of battery damage, the audio will start the anti-theft system automatically-UOBDII.com remind you. So here I want to share you how to use Yanhua Digimaster 3 to decode audio for Mercedes Benz.

Digimaster III can calculate the audio code out or initialize it, as the following picture shows, Digimaster 3 has the function of ” Audio decoding” , after click it, you will find it supports decoding audio for Alfa, Audi, Benz, BMW, Ford, gm, Honda, Lexus, mazda, Mitsubishi, Peugeot, Porsche, Renault, Toyota, Volvo, Volkswagen and more.

2. Audio Code Management
Step 1: Select Benz to decode, and de-solder the corresponding chip according to the software prompts. Click “Next” to begin decoding.

Step 2: remember the code in the pop-up dialogue box, click “Next”, the code was written in the chip.

Step 3: Solder the chip back to the board, and then use this new code to decode the audio.

3 Address Code
These models only need to short-circuit some welding spot to reset the code, the software will give a specific method.

Odometer Correction

UOBDII All rights reserved Mercedes Benz audio decoding using Digimaster III

Yanhua Digimaster 3 Update to 1.8.1612.45

Original Yanhua Digimaster III Odometer Correction tool master software updated to 1.8.1612.45.

Digimaster3 1.8.1612.45 Update Feature:
Digimaster 3 mileage programmer newly added airbag resetting and immo function cars repair.
New added car model for airbag resetting:
1. Toyota 89170-02F30 95160
2.Honda CRV-77960-TOA-H920-M4 95640
3.Ford 7S7T-14B056-BB(V2) 95160
New added Mercedes-Benz immo models list:
1. A class OBD/IR Mode W169
2.B class OBD/IR Mode W246
3.C class OBD/IR Mode W204
4.CL class OBD/IR Mode W216
5.CLS class OBD/IR Mode W218
6.CLK class OBD/IR Mode W209/W207
7.E class OBD/IR Mode W211/W212
8.ML class OBD/IR Mode W164/W164 2009-/W166
9.S class OBD/IR Mode W221
10.SLS class OBD/IR Mode W197
11.SLK OBD/IR Mode W172
12.Sprinter OBD/IR Mode W906
13.Vito OBD/IR Mode W639 2009-


Yanhua Digimaster 3 New added Benz antitheft function list:
Step 1:Read EIS data
Step 2:Get the key code
1. BE key code
2.NEC(BGA) key code (IR)
Key data collecting
Key code calculating
Coded data decoding
3.NEC key code (remove chips)
Step 3:EIS data Synthesis
Step 4:Write New Key
1.write BE(NEC) key
2.Write NEC CPU
http://www.keycuttingmachine.org