Xhorse VVDI Prog, Xprog and R280 Read BMW cas4 5M48H

Reading BMW cas4 5M48H, the optional working programmers are Xhorse VVDI Prog, Xprog 5.5, Xprog 5.6, Xprog 5.7, R280 plus and Smok, etc.

Option 1: VVDI Pro read cas4 5M48H
Xhorse VVDI Pro can read and write 5M48H.
Here how to read 5M48H using Xhorse VVDI Prog.

Procedure:
Video demo: https://www.youtube.com/watch?v=ZWrQdha-OO8&feature=youtu.be
Open VVDI Pro software, select type, manufacture and model as MC9S12XEP100)

Click “Wiring Diagram”
Maximize wiring diagram: right click and select “zoom window”, then pull down window.
Follow the wiring diagram to connect CAS to the VVDI Pro.

Start to connect the cable.Car Key Programming Guide

The left zone is done, next is to do the right zone.

In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos.

Next is to remove this 0 ohm resistor.

Wiring is done, 0 ohm resistor is removed

Plug adapter into VVDI Pro.

Close wiring diagram.

Select “New” – “ Read”
You see it is reading data very fast.
Reading data successfully, click “Save”

Next is to check data.
Open the data, drag the mouse to check, okay, data is all read out, close it.

Option 2: XPROG-M V5.55, XPROG-M V5.70 and XPROG-M V5.60
Compared with XPROG-M lower version, XPROG-M V5.55, XPROG-M V5.70 and XPROG-M V5.60 add adaptor for 5M48H P-Flash, and already tested successfully by many ECU tunners.

Option 3: R280 Plus CAS4+ BDM programmer for MC9S12XEP100 chip (5M48H/1N35H) 
Top 5 features:

1. R280 Plus, a powerful Motorola microcontroller dedicated programmer, supports the latest BMW Motorola MC9S12XEP100 chip (5M48H/1N35H).
2. It supports automatically search mileage address and display the mileage
3. Remove the chip, directly input the number of kilometers, the data is visible and can be arbitrarily edited, it allows user to arbitrarily read and write /P-FLASH D-FLASH data.

In a word, R280 plus features a powerful, decryption security, becoming the automotive computer repair, data recovery, data transfer and other professional electronic maintenance engineer.

4. The latest generation of processor programmer.
5. Using the latest software and hardware, hardware security level is high.

Powerful R280 Plus Update: Support for the upgrading of programming tools, to provide 24 hours of technical support, product 1 years warranty free upgrade.

Powerful R280 Plus microcontroller dedicated BMW Motorola programmer supports following models:
BMW 1 series – F20, F21 chassis – 2016 years ago
BMW X1 series – E84 chassis – 2016 years ago
BMW 3 series – F30, F31 and F35 chassis – 2016 years ago
BMW X3 series – F25 chassis – 2016 years ago
BMW 5 series – F10, F11 and F18 chassis – 2016 years ago
BMW X5 series – F15 chassis – 2016 years ago
BMW 6 series – DMEM/F12 F13 chassis – 2016 years ago
BMW X6 series – F16 chassis – 2016 years ago
BMW 7 series – F01, F02, F03, F04 chassis – 2016 years ago
BMW GT series – F07 chassis – 2016 years ago
BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.).
BMW EWS4 (2L86D).
EZS (1J35D/2J74Y/4J74Y/0L02M/1L02M/3K85K/3K91D/1L85D/1L59W/3L40K/4L40K, etc.).
Support for a variety of SRS computers
(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K79X/5H55W, etc.).
Support M35080 series quick wipe, read and write (35080/35080-V6/35080-VP/080D0WQ/160D0WQ/35160, etc.).
FLASH 0K50E online write.

Have an overview on R280 Plus Software Display:

UOBDII All rights reserved Read BMW cas4 5M48H by Xhorse VVDI Prog, Xprog 5.5 / 5.6 / 5.7 and R280 plus

SEC-E9 Key Cutting Machine cut Chevy DWO4 car key+ Schlage home key

Do you want a key machine to cut both car key and home key? SEC-E9 Key Cutting Machine can do it! Check below to know how SEC-E9 cut Chevrolet DWO4 key and Schlage key for door lock! Condor XC-009

Part 1: How SEC-E9 cut Chevrolet/ Buick DW04 key blade?
Click the search button on main menu.

Enter “DWO4” then click search icon.

Choose “SILCA”→ “DWO4 (74) (8, 10)”
Choose correct space. In this case it is 8.

Click “Menu” then “Info” at bottom bar to get key blank information.
Click “Decode”, follow the screen guide, use stopper to put the original key correctly on clamp.

Click “Decode” to start decoding.

After that put the new Chevy DWO4R key blank on clamp, click “Cut” then set cutting speed.
Key cutting complete, test new key blank working!

Part 2: How to cut Schlage key by SEC-E9 CNC Automatic Key Cutting Machine?
Click “Standard” button on main menu.

Choose “Schlage” and “All Schlage”.

Select correct key model number and space.


Click “Decode” and pay attention to screen guide to fix the clamp correctly.

Put the original Schlage key to decode.
Then replace the new blank key blade to cut.
New Schlage key cutting finish!


Get SEC-E9 Key Cutting Machine $2,399 for car key and home key at uobdii.com!
http://www.uobdii.com/wholesale/sec-e9-cnc-automated-key-cutting-machine.html

Article from Auto Key Cutting Machine blog

CGDI MB to Program Key for Benz

Attach some pictures on how to use CGDI Benz Prog on Benz step by step incl. lock (EIS), read/write key, generate EE, computer password, etc.
for more about CGDI,visit our official website: CGDI Shop


Here we go.
CGDI Prog on Benz: lock (EIS)


CGDI Prog on Benz: read/write key


CGDI Prog on Benz: generate EE

CGDI Prog on Benz: computer password


CGDI Benz key pro for sale:
http://www.cgdishop.com/wholesale/cgdi-prog-mb-benz-car-key-programmer.html

CGDI BMW program key on BMW CAS4 /CAS 4+ all key lost

Have BMW MSV80 and looking for a key programmer to add new key for BMW CAS1/CAS2/CAS3/CAS3+ and match key for CAS4 /CAS 4+ when all key lost, you must use CGDI Prog BMW MSV80 key programmer.


Attach one table which show CGDI Prog functions, workable models and working time


As you can see, CGDI Prog BMW MSV80 key programmer has these capabilities:

1. 1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, KEY all lost matching, CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching, support key all lost matching.
3.Support BMW key inspection, can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exclusively support in Domestic
6.Support BMW Key unlock.

Moreover, CGDI Prog can perform:
1.Update in real time, products updated in zero cycle time, support model added in real time.
2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer, ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.

CGDI MB Benz

How to use CGDI Prog BMW MSV80 key programmer?
Method 1: can directly read ISN code in the car, please ensure the car voltage is 12V and above, it directly connects OBD to operate, takes about 5 minus.
Method 2: can directly disassemble engine computer (DME) to operate, follow the below guide to connect the line:

 
CGDI Shop

Top 5 Auto Key Cutting Machine for Automotive Locksmith

Here are 5 auto automotive key cutting machine for auto locksmith.

iKeycutter Condor XC-Mini

 

1. Built-in Database, can easily find key information

2. Support Multi-languages: Portuguese/Spanish/French/Germany/Czech/Arabic/Turkish/Dutch/Polish/Bulgarian/Norway/Slovakia/Italian/English/Chinese
(Turkish and Russian will be released in the future)
The way to change language:
Please provide us with the serial number and wait us to authorize the language you want, then you can use the Update Tool to choose the language.
3. Update Online Lifetime

4. 3-Axis Precision Ball Screw Transmission

5. Cross Rail

6. All Aluminum Machine Body

7. Single machine with both Tracer/Cutter

8. Standardly include clamps M1/M2, M3 needs to buy alone

9. Support Sided/Track/Dimple/Tibbe keys
10. Some Dimple/Tibbe keys need optional clamps

src:http://www.uobdii.com/wholesale/ikeycutter-condor-xc-mini.html




SEC-E9 CNC Automated Key Cutting Machine

1. Can directly search key bitting number by key code for some keys. No need to search from Instacode
2. Can cut a new key by bitting number, when original key is lost.
3. Support 10 languages including English, Spanish,French,German,Italian,Korean,Portuguese,Russian, Turkish, Czech.
4. Can cut veritcal milling, flat milling, internal milling and external milling.
5. Can cut automobile keys,motorcycle keys ,dimple keys, tubular keys, and single-sided standard keys.
6. Can cut Tibbe keys and LDV keys
7. Auxiliary Clamp is available
8. CE Approved
9. Work on Car, Truck, Motorcycle, House Key, Dimple & Tubular Keys
10. Update Online for Free


Automatic V8/X6 Key Cutting Machine with Dust Cover

1. It can be used with the key keyless condition, lightweight and portable, battery-powered DC electrical impulse is very suitable to go out to work.
2. Mainly used have the key with keyless lost data with the key. When there is a key, simply follow the steps to enter the number or read key teeth tooth number, you can make a new key. When a key is lost, just follow the prompts, enter the appropriate number of head lock, you can make a new key.
3. It is also can according your requirement ,through the intelligent choice to make key tooth depth. Easy to use, suitable for a variety of automotive lock key.
4. USB cable data transfer, compatible with a variety of key database
5. Quick change guide pin and cutter
6. Modular design, easy maintenance (Quick Change Module)
7. English menu. Configuration:
one PCS English manual ( Electronic files ).
one PCS 2.5mm dedicated mills. two PCS Dedicated probe 2. Spare belt.
one PCS USB data cable and one set Electrical impulse
8. Multi-language support: English ,Italian,Portuguese,Spanish


368A Key Cutting Duplicated Machine

1. Multi functional practical machine, equipped with horizontal feeding movable handle
2. Multifunctional steel fixture, can copy various hollowness type,wave type,cylindrical key and key for multi lock and composite bead keys and some car keys,such as BMW,HONDA,Volkswagen car keys
3. Fixture with dark key duplication service pitch line and cylinder type key assembly function (multifunctional clamp)
4. With hardened ball bearing slide mechanism.
 
JINGJI L2 Vertical Key Cutting Machine

1. Callibration system indicated by LED light make sprecisely cutting
2. Cutter speed regulated to 8500rpm
3. Straight line slide carriage makes cutting smooth and effortless
4. Cutting depth locking mechanism makes accurate result
5. Rmovable jaw with two grooves makes cutting more convenient
6. Vertical movement backwards makes more space to install clamp
7. Spring loaded tracer point make sperfect depth alignment
8. Structured with aluminum alloyed casting technique
9. Armrest support makes the cutting forward stable and smooth
CGDI Shop

More info about key cutting machine,please visit:Key cutting Machine

Yanhua Mini ACDP Programmer Function List

Recently,Yanhua released their newest programmer Yanhua Mini ACDP Programmer.It will save a lot of time for auto locksmith,because you don't need to soldering/welding when you use Mini ACDP to perform key programming or mileage correction for BMW.

Yanhua Mini ACDP Programmer Function List:
1. Memory programming:
Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).

2. BMW module programming:
(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.
(2)BMW engine ECU data reading and ISN code reading

3. VW module programming. MMC instrument
4. Instrument mileage and airbag ECU reset/maintenance is under development.
5. BENZ. BMW Audi and various models are upgraded successively

Yanhua Mini ACDP Programmer:
http://www.uobdii.com/wholesale/yanhua-mini-acdp-programming-master.html