TMPro 2 Transponder Key Programmer Software Installation & Update Guide

TMPro2 works with immobilisers eeprom dumps. You must have electronic knowledges and to know how to use soldering-desoldering tools and memory devices programmers.

Installation of programmer on computer is very easy.
1.TMPro software: download from here and unarchive in any folder.
2.USB driver: connect TMPro hardware and:
– Windows 7 and up users – Windows will installs driver automatically.
– Windows XP and some 7 users – if Windows asks for drivers download drivers from here
After drivers are installed successfully start TMPro2.exe software. If everything is OK, in left down corner of software you have to see message: No file loaded. Your TMPro programmer is ready for use.

TMPro 2 programmer can be installed on unlimited number of computers.
If you run TMPro software BEFORE installing of programmer, you may face this error: “Program cannot start because FTD2XX.dll is missing”.
If in left down corner of software you see message “Hardware NOT found“, this means that something with driver instalation is wrong. Restart computer and try again with drivers installation.
 
DO NOT SELECT AUTOMATIC installation.
Ignore installation of COM port. After finishing start TMPro.exe software. In status bar at left down you have to see: No file is loaded. Your programmer is ready for use. If you run TMPro.exe BEFORE installing of drivers,you may face error. If you see "Hardware NOT found", this means that something with driver installation is wrong. Restart PC and try again with installation. You can check if installation is good - in Device Manager - USB devices - you have to find "Transponder Maker Pro 2".

Windows 8 users: You must disable driver signature enforcement.

Soursce:http://www.uobdii.com/wholesale/tmpro-2-original-transponder-key-programmer.html