Launch X431PRO & PRO3 Firmware Repair Guide

 Step –by –step procedure on how to fix X431 PRO & X431 PRO3 Firmware.

The software should try and do this automatically after an update, when you go to diagnose a vehicle. If the DBS connector fails to connect to the tablet, or you need to manually do a “firmware fix” then follow these instructions to ensure the latest version of firmware is currently installed on the DBS connector;

    Open the” Launch X431″ app
    Tap the top left “three white lines” icon to open the side menu
    Click on the Profile tab and then “Firmware Fix”
    Firmware Fix screen will prompt instructions
    Make sure DBS connector is connected to a vehicle with sufficient battery power
    Firmware fix should have completed successfully.OBD2

If firmware fix did not finish or complete successfully, this means you already have the latest version of firmware, or you can try restarting the tablet and running through the “firmware fix” again.

Article from: Launch X431 Blog

How to solvedLaunch X431 V 8.0 inch Software Downloading failed

Several days ago,one of OBD2 Customer sent e-mail to UOBD2 engineer about Launch X431 V8 softwrae download error.In this article UOBD2 will give the solution.


Q: I have download 82 car brand software from Launch X431 v 8" official website, but when i try to download the final Renault software, it failed to download, and notes Downloading failed

A:
1; Re-start the tablet to download the last software again
2; Change other network connection


If you cannot register or login X431 V 8.0, try the solution above as well.

VVDI Key Tool Programmer Function List

VVDI KEY Tool is a efficleancy device, imaple and easy for getting your work. Xhorse VVDI Key Tool supports nearly all common remote types that can be generated in the market. it can replace hand baby and CN900 Mini. VVDI Key Tool also add more transponders and function.Xhorse VVDI Key Tool Car Transponder Programmer VVDI Key Tool Replace Hand Babay and CN900 MINI

VVDI KEY TOOL Function List:

Transponder Generation:
Write most common transponder available in the market including 36, 46, 47, 60, 70

Transponder cloning:
Support 46 42 11 12 4D
Frequency & power tester:
Frequency test of 27-900 MHZ
Power test 300-450 MHZ

Remote cloning:
Rolling code & Fixed code

Generate remote:
More than 400 FCC ID types

Generate Garage door remote:
More than 100 types

Unlock OEM remotes:

NXP keyless & Prox Remotes

VVDI Key Tool Adapters, can renew different kind of used original remote key[The Adapters need to buy separately,not include in the package]

Renault Can Clip V167 Update + Download Link

Good news for sharing: Latest Renault Can Clip software update Renault Can Clip V167 is available to download here! Please enjoy at your own risk and hope it helps!

Free Download Renault Can Clip V167 mega:
https://mega.nz/#!IcwSVLTY!gXLAiI_Rt1gi49h51aPSee35t1IkwMiKK1Vy3YbDc8Q
NO pass
Link is tested working
Renault Can Clip software info
Version: V167
Year: 04.2017
Size: 1.84Gb
Type: Renault Diagnostic Tool.
Region: All Region
Language: English (Multilingual)
Developer: SPX
Platform: Win XP, Vista, Windows 7
Medicine: Present

Which interfaces are recommended for Renault Can Clip V167?
Renault Can Clip with AN2135SC AN2136SC (A Quality)
Renault Can Clip diagnostic tool (Best Seller, cheapest)
Other Renault Can Clip software updates info for you:
Download Renault Can Clip V166 here:
https://mega.nz/#!7cBVCSiS!SR_FluwN1PWoYc1KFp8vL7sAhMDAGfr8m1u1JxUfobY
Get Renault Can Clip V165 software CD tested 100% safe and working $9.9
http://www.uobdii.com/wholesale/can-clip-for-renault-software-cd.html

UOBDII All rights reserved Renault Can Clip V167 Update + Download Link [04.2017]

CK100 auto key programmer V45.09 vs. V46.06 vs. V99.99

There are several versions of CK100 auto key programmers on the aftermarket: CK100 V45.09, V45.06 and V99.99.
NOTE: CK100 V45.02 auto key programmer is out off production in OBD2.

How to tell different CK100 auto key programmers? Here is the comparison table:

Item	CK100 V45.09 key programmer	CK100 V45.06 key programmer	CK100 V99.99 key programmer
Item No	SK117-D	SK117-C	SK117-B
Function	key programming & pin code reading for some vehicle models	Key programming	Key programming
Quality	Clone best quality	Clone high quality	Clone good quality
Update	Can not be updated
Token	2014 tokens, buy AT89C51CC03U NXP Fix Chip with 1024 Tokens
Model year	Till 2014.09	Till 2014.04	—
Language	English/ Italian/ Dutch/ French/ Spanish/ Portuguese/ Turkish
Add vehicle model	Adds vehicle 2014.04-2014.09	Ford, Honda and Toyota etc	—
Price	US$ 139	US$134	US$95

In conclusion:
1. CK100 OBD2 auto key programmer V45.09 adds pin code reading function for some models, but V45.06 and V99.99 can not.
2. CK100 V99.99 enjoys cheapest price comparing with the other two.
3. According to customer’s feedback, CK100 V45.09 and V45.06 have better quality than CK100 V99.99 auto key programmer.
Newest CK100 V45.06 pin code reading vehicle list:
1) For HYUNDAI PIN CODE
2) For KIA PIN CODE
3) For NISSAN BCM CODE
4) VAG PIN CODE SYSTEM1 (SYSTEM2,KOSTAL,MEGAMOS/DELPHI)
5) VAG 7-4 PIN CONV (PIN7,DEALER,IMPORTATORE,PIN4,DATA(00/00/2000),EXIT)
6) For GM PIN CODE ECM TYPE 1 (ECM TYPE 2,ECM TYPE 3,ECM TYPE 4,ECM TYPE 5,ECM TYPE 6
7) For CHRYSLER FOBIKCODE
8) For FORD KEYLESS ECODE (KEYLESS ENTRY CODE1,KEYLESS ENTRY CODE2)

MB SD Connect C4 V2017.05 for offline programming

The offline programming has been switched off on DAS auto diagnostic tool beginning from DAS 012010. So now when you want to program a control unit for whatever reason you will need to go online to after sales platform which of course will require a dealer login and a password and only then you will be allowed to program the control unit. And this will be possible only if your control unit contains the software version older than the software version available. If the software inside the control unit is the already latest one and you still need to program it you will get a message saying that “No newer software was found”. (Soon there will be a solution how to avoid this message).OBD2

Here, we will tell you the offline-programming version.
The best version   X431 Tool
Permanent version
Free versions


This is the one highly recommend although the version is kind of old.
The package V2017.05 MB SD Connect C4 with DELL D630 laptop and preinstalled software is very convenient for users who do not have DELL D630 laptop or do not want to install software. Besides, you need to buy additional setting up offline mode in old DAS software.
But you need set up WIFI and Lan cable connection by yourself if you want to do online programming. This package also includes the offline programming activation software.

V2017.05 or the latest software for online programming:
NOTE: if you want to do online programming, you need the new software v2015.05 or the latest software. Our v2012.11 only support offline programming. If you want to do both online and offline programming, you are advised to have both v2012.11 software and v2015.05 or the latest software.

How to do offline programming V2012.11 software?Xhorese VVDI

  
Original super mb star c3 (not limited software version) do offline programming permanently XTOOL SHOP
Super mb star c3 is the most ideal version to do offline programming no matter which software version. But please enable the offline-programming function before use, then you can update it online and to use the newest star software for diagnosis.

Offline programming for free—2015.05 star diagnostic software
Offline-programming function is available and free for all V2015.05 star diagnostic software incl. star c3, sd connect c4.Autel diagnostic tool

 

UOBDII All rights reserved (Best) MB SD Connect C4 V2012.11 for offline programming

VAS 5054A ODIS 4.0.0 PostSetup 30.0.10 free download

Newest ODIS 4.0.0 PostSetup 30.0.10 is verified working fine on VAS5054A interface (Chinese). The new release brings many new functions, fix bugs and many new VAG models.
Free download ODIS 4.0.0 PostSetup 30.0.10 torrent:
https://mega.nz/#!kkxEAaib!gXrR7d_nX7WpRv6X1YkRBiRoqp7F-VYKodnTP0ErtbM
(100% works)

Works on:

• Windows 7 32bit works, other OS, try at your own luck
• Works on VAS5054A interfaces:

Item No. SP33-BO, Bluetooth and OKI chip, $74.99 (OK)
VXDIAG VCX NANO VAS 5054, WIFI, $65.99 (OK)
Item No. SP33-B, Bluetooth, $59.99 (OK)
Item No. SP33-E, Bluetooth (AMB 2300), $99 (OK)
Item No. SP33-C (Fail)
Item No. SP33 (Under testing)
Item No. SP33-D (Under testing)
ODIS 4.0.0 PostSetup 30.0.10 installation easily with Youtube video:
Works on WIN7 32bit

Two testing pictures overview: 

Release ODIS 4.0.0 PostSetup 30.0.10 upgrade content
New functions

• Support for Windows 10 operating system

• Performance optimization in the diagnostic entry

• Detection of the VAS 6154 via subnets

• Support for non-converging measurements in the GFF

• Integration of the brand Bugatti

Bugfixes

• Deviation in the EcuCom job for “ECU coding” KWP2000

• ODIS installation error message – Could not call proc – Actia PDU API

• Flashing with large data container, flash session is not started

• Fuel system can not be vented // Level not readable

• Flash abort ERROR PROGRAMMING at Audi A1 Bremse (TPI 2033217/3)

• ODIS crashed when switching from USB to Bluetooth

• Bluetooth connection type: No new connection was established after the diagnostic test was again within range of the VAS5054A.

• Crash at application start

• Update to 3.0.2 fails with ODS4010E: UpdateProcess failed with 11

• Query error memory hangs: “Read control units (33%)”

• Connection setup when changing from Bluetooth to USB takes too long

• Authentication problem in WLAN infrastructure mode with RADIUS server

• VAS 6154 is searched for on the wrong interface after completion of the diagnostic session

• ODIS service SingleBuild installation, setup message “Runtime Error” for recovered testers

• DA_14 in the AU48X DSD not possible

• VCI 5054 Connection termination for Windows user change

• ODIS Interface texts: German texts have been deleted from the XML files (vaudas.texts)

• ODIS Service does not display the version of the diagnostic data for MAN in the correct format.

• Calibration instruction must be adjusted

• Buttons are displayed partially in the wrong language (German instead of English).

• The symbol of the status icon changes with the ODIS close

• Buttons to start the JRC and choose your own exam is missing

• The date in disclaimer with EN-US language is not displayed correctly

• In the installation dialog, the language en_US is displayed twice

• Speech caseback leads to corrupt feedback file (invalides XML)

• Vehicle project VW VIN can not be opened // ODS8003E Execution in system state PROJECT_OPENED not possible.

• VCI-Number on DISS-protocol

Vehicle restrictions

• For brand AUDI, the Flash mode is supported.

• For brand Volkswagen PKW, the Flash mode is only partly supported. The usage is only allowed if described in TPI.

• For all other brands, Flash mode is restricted.

Supported Vehicles
All supported vehicles are listed below.
Supported AUDI-Models

• All AUDI-Models are supported.

Supported Volkswagen-Models

• All Volkswagen-Models are supported.

Supported Volkswagen Nutzfahrzeuge-Models

• All Volkswagen Nutzfahrzeuge-Models are supported.

• Only immobilizer components in LT2 vehicles can be diagnosed.

Supported Seat-Models

• All Seat-Models are supported.

Supported Skoda-Models

• All Skoda-Models are supported.

Supported Bentley-Models

• All Bentley-Models are supported.

Supported Lamborghini-Models

• Only the following Lamborghini vehicle models are supported:

o Gallardo from MY09-MY14 (only for Immobilizer and Radio Pin)
o Aventador
o Huracán

OBD2 All rights reserved ODIS 4.0.0 PostSetup 30.0.10 torrent free download & installation on WIN7

EL50448 relearn Chevry Cruze TPMS

EL-50448 TPMS Reset Tool is special for GM Series vehicle.This article is the EL-50448 instructions on how to use EL50448 reset Chevry Cruze tire pressure monitor sensors.

Tools you need:

EL-50448 GM TPMS reset tool.

First,you need to get in car TPMS learn mode.

1.Set parking brake.
2. Turn ignition to ON/RUN (engine off)
3. Use the MENU button to select the VEHICLE INFORMATION menu in the DRIVER INFORMATION CENTER (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.

Second,use el50448 to close each valve stem.

Note: Beginning with the left front tire, Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. You can then turn the vehicle off to exit “learn mode.”

(Starting with Left Front tire -> Right Front -> Right Rear -> Left Rear)

Article form:https://uobdii.quora.com/EL50448-relearn-Chevry-Cruze-TPMS