How to Use Digimaster 3 to Decode Mercedes Benz Audio?

When the vehicle audio was power off because of battery damage, the audio will start the anti-theft system automatically-UOBDII.com remind you. So here I want to share you how to use Yanhua Digimaster 3 to decode audio for Mercedes Benz.

Digimaster III can calculate the audio code out or initialize it, as the following picture shows, Digimaster 3 has the function of ” Audio decoding” , after click it, you will find it supports decoding audio for Alfa, Audi, Benz, BMW, Ford, gm, Honda, Lexus, mazda, Mitsubishi, Peugeot, Porsche, Renault, Toyota, Volvo, Volkswagen and more.

2. Audio Code Management
Step 1: Select Benz to decode, and de-solder the corresponding chip according to the software prompts. Click “Next” to begin decoding.

Step 2: remember the code in the pop-up dialogue box, click “Next”, the code was written in the chip.

Step 3: Solder the chip back to the board, and then use this new code to decode the audio.

3 Address Code
These models only need to short-circuit some welding spot to reset the code, the software will give a specific method.

Odometer Correction

UOBDII All rights reserved Mercedes Benz audio decoding using Digimaster III

TMPro 2 Transponder Key Programmer Software Installation & Update Guide

TMPro2 works with immobilisers eeprom dumps. You must have electronic knowledges and to know how to use soldering-desoldering tools and memory devices programmers.

Installation of programmer on computer is very easy.
1.TMPro software: download from here and unarchive in any folder.
2.USB driver: connect TMPro hardware and:
– Windows 7 and up users – Windows will installs driver automatically.
– Windows XP and some 7 users – if Windows asks for drivers download drivers from here
After drivers are installed successfully start TMPro2.exe software. If everything is OK, in left down corner of software you have to see message: No file loaded. Your TMPro programmer is ready for use.

TMPro 2 programmer can be installed on unlimited number of computers.
If you run TMPro software BEFORE installing of programmer, you may face this error: “Program cannot start because FTD2XX.dll is missing”.
If in left down corner of software you see message “Hardware NOT found“, this means that something with driver instalation is wrong. Restart computer and try again with drivers installation.
 
DO NOT SELECT AUTOMATIC installation.
Ignore installation of COM port. After finishing start TMPro.exe software. In status bar at left down you have to see: No file is loaded. Your programmer is ready for use. If you run TMPro.exe BEFORE installing of drivers,you may face error. If you see "Hardware NOT found", this means that something with driver installation is wrong. Restart PC and try again with installation. You can check if installation is good - in Device Manager - USB devices - you have to find "Transponder Maker Pro 2".

Windows 8 users: You must disable driver signature enforcement.

Soursce:http://www.uobdii.com/wholesale/tmpro-2-original-transponder-key-programmer.html

VVDI Prog and Xprog is Best Choice for Fresh Man

If you are a beginner of VVDI Programmer, you don’t need the adapters, if you need to read eeproms, get a second programmer like Xprog 5.55.

And for many auto locksmiths,it is important to choose a suitable programmer,here i put it here:
http://www.uobdii.com/wholesale/auto-key-programmer/

Why another programmer? Is not good with eep?
Xprog is cheaper then a vvdiprog adapter.
vvdi prog is good for reading proccesors.
Some have had problems reading eeproms.
This might be solved now that there is a adapter.
If your vvdiprog fails, at any reading or programming, you will have a backup.
It also helps as a confirmation to solve some reading writing problems.
All my collegues have at least few laptops, w7 32 w7 64 and xp.
And xprog, upa, tl866, willem, orange5
Xprog, is a great tool, and comes with many adapters.
Some even sell a xprog clamp adapter, to make i even more handy to use.
The picture posted, is 17euro adapter to use on xprog.



UOBDII All rights reserved Why vvdi prog + Xprog is needed for a beginner?

Car Key Programmer:Automotive Locksmith Handheld Choice!

The following parts list the most popular hand-held car auto key programmer for all makes which best for professional locksmiths. They are SBB Pro2,Smart CN900 Mini, CK-100 and Original X-100+.



 SBB Pro2 V48.88 Programmer:

Now SBB PRO2 Key Programmer Updated to V48.88 Version.support new cars to 2017.12. like for Acura 2017, Chevrolet 2017,Buick 2017, Cadillac, GMC 2017, Ford 2017,Dodge 2017,Toyota 2017...


CK-100 Auto Key Programmer

• Newest generation SBB, compared with Silca Sbb, CK-100 auto key programmer newly add some models and even covers up to 2014. CK100 is available with 3 kinds of version, V99.99, V45.02 and v45.06.
• CK100 V99.99 can support Lexus RX350 07-09, SBB can’t; CK100 V99.99 covers Lexus SC430 02-10, SBB only cover 02-06; CK100 V99.99 can do Corolla (CAN) from 2009 to 2012, SBB up to 09.
• CK100 make key by simply plug 16pin cable with OBD diagnostic socket, no need connect with computer. It can only communicate with the standard OBDII protocol vehicles. If your car is not standard 16pin connecter and not standard OBDII protocol, use T300.
• CK100 has 1024 tokens, after use it up, go to change a chip by following the seller’s instruction.

CN900 Mini Programmer:
CN900 Mini is the replacement of CN900 Key Programmer that can easily hand-held, which can easily update online as CN900.

1. Smart CN900 Mini Transponder Key Programmer
2. Support Online update
3. Various types of vehicle anti-the fault detection, matching detection
4. Portable Super long standby
5. support four kinds of frequency 850/900/1800/1900MHZ
6. Support 11/12/13/33/T5/4C/4D/42/46/48/72G chip copy.
7. GSM/GPRS SIM
8. USB2.0, Bluetooth4.0

Yanhua Mini ACDP Programmer:
Yanhua Mini ACDP Programming Master support BMW CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+/FEM/BDC Key Programming by OBD port, no need soldering, which also can read BMW DME ISN by obd, BMW 35080, 35160DO WT EEPROM Read & Write, Fujitsu CPU MB91F Read & Write, Read & Write BMW 35080, 35160DO WT, MQB/MMC Instrument, Refresh BMW Keys and BMW FRM Programming. Work on PC, Android and IOS. 

OBDSTAR Key Programmer is also a good choice for locksmitch.


Article from: Which better handheld car key programmer for all makes?