VVDI mercedes review
VVDI Prog programmer review
VVDI2 programmer review
CGDIShop
VVDI MB Tool review
– cost-effective and powerful
vvdi mb can renew elv without soldering the nec while the other should sold out and not make via obd2, vvdi mb can renew EIS no need token even its bga eis , while others cannot , with small budget can program bga key with 6 minutes while with others you need 5 thousands dollars to do , more over for w204 all key lost no body in the world can do it while they are working on it with vvdi
– 204 all keys lost ok
For 204 all keys lost one solution is to buy eis with key tested and ok
– W203 password calculation via IR
I read pass W203 IR OK
– W203 W220 read password ok
W203: EIS/EZS A203.545.05.08 – MCU ??? -read PSW IR – OK
W203: EIS/EZS A203.545.05.08 – MCU 1J35D – read PSW – OK
W220: EIS/EZS A215.545.02.08 – MCU ??? -read PSW IR – OK
– support older ESL
old ESL(motorola) are supported read through K-line yet……look in ESL menu, there are some possibility…
for me are all older ESL from 202, 203, 208,209,201,211 and so…then when in the adapter are socket for the 28-pin HC05E6 motorola, then are this supported too…
the emulator is too for all this OLD type of ESL…
– renew this namber 7G tronic 003 446 0310
Can renew this namber 7G tronic 003 446 0310
i have renewed 10 pcs of this part number, all success
– made a key to W203
I have made a key for W203.
Works great but the remote controle opens only the drivers door.
– Exchange W204 ESL without renew EIS
Exchange W204 ESL without renew EIS. In ESL Tools, write EIS with password(Select Auto clear TP and personalized) tested and work ok
– w204 w207 w212 all key lost work
All key lost:
W204 work
W207 work
W212 work
VVDI Prog Review
– read/write Fiat 9s12dg256b mcu without problem
Yesterday i read/write mcu 9s12dg256b from fiat bcm with vvdi Prog WITHOUT Problem
– VVDI Prog secured very well
I work’s on opel astra h cim with hc912 mcu,
ford dashboard hc912, and with hc908az60
secured very well.
– 080dowq erasing works perfect
Now I tried 080dowq erasing, and it works perfect.
– R/W ok with CIM Opel Astra H
3L40K – Read ID (0113) ok, Rean EEP (ok) Read Flash (ok)
1L59W- Read ID (0115) ok, Read EEP (NOT) Read Flash (NOT).
Ps. 3L40K – Just that flash is smaller than It should be.
Read-it with smok, and You will understand what I am saying.
– 50/50 chance to Porsche BCM
I have tried to read Porsche BCM with 9S12 5M48H dated 2013 MCU but could not do it because VVDI Prog did not detected chip ID. Always get ID: FFFF
While Porsche BCM with MCU 9S12 2M25J dated 2014 have read without problems
– 209 flash ok
I received the vvdi prog and tested eis
209 with st12 eeprom flash ok
– vvdi prog read ok with W221
for w221 ism with ST10F269 read by vvdi prog OK with micromax diagram
for write it didn’t erase automatically you have to erase it before, then all OK .
– ok with D70F3571
vvdi prog 4.5.1 D70F3571 read ok
– no issues with BSI 307 2002
BSI 307 2002 912DG128 – 3K91D
EEP (read and write) – OK
FLASh 4.000Mhz (read and write) -OK — Orange5 clone (DO NOT write flash)
Identical files Vvdi prog and Orange5, same EEP and FLASH.
Incircuit BSI photo of Orange5.
– vvdiprog + eeprom adapter without issues
works fine with eeprom adapter
does not work with test clip tried to different ones,
maybe i should try other one, if there is any higher quality,
or maybe because of cable length it doesnot work
– good at EZS, CAS2, CAS3, CAS3+ …
this programmer can read write EZS, cas2, cas3, cas3+, read other motorolas safe without any problems or damages
– work OK on BMW CAS4 F10 2014
Today tested: CAS4 with Motorola 1N35H mask from F10 2014!
d/p-flash BACKUP – ok
Crack chip security – ok
read/write p/d-flash – ok
Locked – ok
Works without heating the chip. Only removed 4 elements from the board, and after operations resoldered them back.
i have desoldered 4 elements from the board: transistor, capacitator, resistor and cristal/quartz.
– vvdi prog not working?:
– VVDI PROG CANNOT READ 68HC805 FOR IMMO MAZDA 323
– It cannot read hcx05 at all.
– Cannot support read pin code for psa and old chrysler
Xhorse VVDI2 review
VVDI2 BMW:
– CAS1 bmw read eeprom by obd
i did yesterday CAS1 bmw read eeprom by obd and got key info and cutting code
– bmw ews direct by obd
vvdi2 bmw can make key in bmw ews direct by obd or need read ews dump by programmer then make key
– program new keys to bmw e90 2008 USA
i have a vvdi2 with vag and bmw authroization
have to programmed new keys in bmw (bmw e90 2008 USA year), without keyless go
in original key inside transponder pcf7953 315mhz
My hint for you: Chinese keys work only transponder but remote need to remove cas and do it on bench on tango or xhorse vvdi, but obd method need always original for better chance chip is 7945 or 7953 which is 46 family good luck
– support MED17/EDC17 dump tool
Xhorse vvdi2 v1.2.1 adds support for MED17/EDC17 dump tool, support clone ECU(Menu->Special Function->MED17/EDC17 dump tool)
But sadly only work for Condor key cutting machine users
my vvdi 2 is full not basic.but function for edc17 only for condor cutter user.no for all vvdi2 full user
vvdi mb bga have the token system, if you have condor cutter 1 token in 1 day for free if you don’t have you need pay
it is different
VVDI2 AUDI:
– do Control head on A6
Vvdi2 able to do Control head on A6
need Transponder Sokymat Crypto 8E – Audi ID8E precoded by Component Security.
If you want to add remote key: 4F0837220AK, 4F0837220R, 4F0 837 220 – and others.
– key learn for Audi A4 RB8 crypto (2004+)
VVDI2 key learn procedure for Audi A4 RB8 crypto (2004+) option:
Just read the pin and cs from ecu.
Make backup from cluster, and the cluster configuration.
Then make a dealer key, and learn it with pin.
– Audi A7 2012 km done
Audi A7 2012 km done by reading config by obd then read eeprom by Programmer ——– ok!
– Audi S8 spare key job done
Did one Audi S8 done successfully, spare key job
– add keys to AUdi a4 2009 BCM2
AUdi a4 2009 BCM2 key added successfully in 2 minuts.
– Audi Q5 add keys, read bcm2
I did Audi Q5 add key ok, read BCM2 by OBD ok, read BCM2 by bdm ok.
Passat B6 all key lost by eep ok.
– Audi A3 8P 434 not working
Remote programmer test remote for Audi A3 8P 434, not working.
Not file for Golf 5 434.
Test remote generator Ibiza 6J “1k0 …. N” 434 working.
– Audi A4 2008 not working
VAG remote key adaptation does not connect to many old cars but usually works fine with newer “dealer keys”. However, Audi A4 2008 did not connect to car (BCM or BFM). Key programming ok.
On a side note: A4 2008 do not have BCM, models 2009 + has BCM.
VVDI 2 & others:
– Peugeot 308 2008 BSI JC pin extracted
Peugeot 308 2008 BSI JC pin extracted OK. Key learn failed – first key OK, second key failed. Tried several times. Job finished with other device.
– Passat B6 read code and add keys
Passat B6 read Code from confort module (95320) & added key ok!
– 0D69J file identified
BENZ a class 0D69J file identified ok, but write transponder not work
– Passat B7 failed
Passat B7 Read Code from confort (95320) & add key by obd ——— Failed, (i made by transponder tool option)
VVDI Key Tool
UOBDII All rights reserved Xhorse vvdi review of VVDI2, VVDI Prog, VVDI MB
No comments:
Post a Comment